pfmea

网络释义：过程失效模式及后果分析(Process Failure Mode and Effect Analysis)；潜在失效模式及后果分析(Potential Failure Mode and Effects Analysis)；失效模式分析

网络释义

1.过程失效模式及后果分析(Process Failure Mode and Effect Analysis) 过程流程图编制 3.4 场地平面布置图 3.5 过程失效模式分析（PFMEA） 3.6 试生产控制计划编制 3.7 作业指导书编制 3.8 初 …

5.制程失效模式与效应分析 ... 识别顾客关键特性（ CRITICAL TO CUSTOMER，CTC） 制程失效模式与效应分析（ PFMEA） 动作组合（ …

1.Are process controls in place in the PCP to address the high PFMEA Risk Priority Numbers?控制计划是否针对高PFMEA风险顺序数项目，采取适当的过程控制？

2.Clarify the linkage between DFMEA and PFMEA, as well at the linkages to the other core tools.清晰地连接产品失效模式和后果分析和过程失效模式和后果分析，以及和其他核心工具之间的连接。

3.Take charge process flow diagram, PFMEA. , process control plan. , operation instruction. for his group.负责小组工艺流程图、PFMEA、控制计划编制、操作指导书编制。

4.Are appropriate potential failure modes, as identified in the PFMEA, addressed through the control plan?中视别的潜在失效模式是否通过控制计划进行得到控制？

5.Does the PFMEA include all WP and internal SCs (boats) and Safety Requirements as defined by WP drawings and internal requirements?PFMEA是否包含所有WP图纸要求的以及根据自身过程所定义的关键过程特性和安全性要求？

6.Overall responsible for all molding process documents maintain, PFMEA update and optimization.负责整个注塑制程的文件维护，过程FMEA的更新和优化。

7.Generates Equipment Floor Plans, Process Flow Diagrams and PFMEA's from Engineering Part Prints for new programs.根据新项目工程产品图纸天生设备平面图、工艺流程图和PFMEA。

8.Participate in assembly line process analysis, PFMEA analysis and Control Plan draft.参与装配线流程分析，过程失效分析和控制计划的制定。

9.Set up process document, and related engineering document like WI, PFMEA, PMP, Control Plan & Process Flow chart.设立工艺文件及相关的工程文件，如WI，PFMEA，PMP，控制计划及工艺流程图。

10.the PFMEA include all customer and interal Scs and Safety Requirements does as defined by customer drawings and interal requirements?是否按图纸的规定包括了所有顾客和内部要求的特殊特性和安全要求？